Rebar and mesh both reinforce concrete, but they’re not interchangeable — they’re generally used for different jobs, and quite often a single project uses both.

The short version

Mesh (fabric) is a flat sheet of welded wire, generally used in slabs — driveways, floors, patios — mainly to control shrinkage cracking and share light structural loads across the whole slab area. Rebar is individual bar, cut and often bent to a specific shape, generally used where concrete needs to resist bending or tension in a specific direction — foundations, footings, retaining walls, beams and columns.

Why retaining walls and foundations usually use rebar, not mesh

A retaining wall has to resist the lateral pressure of the soil behind it, which puts tension on one face of the wall — a job that needs bar positioned and sized precisely where the engineer’s calculations say the tension will be, not a uniform sheet of mesh. The same logic applies to most foundations and footings: the reinforcement is doing a specific structural job in a specific direction, which is what individual bar is for.

Why slabs usually use mesh

A slab is generally under fairly uniform load and the main risk is shrinkage cracking spread across the whole area — exactly what a mesh sheet is built to control efficiently, without the labour of placing and tying individual bars across the whole area.

When projects use both

It’s common for a single job — a house extension, for example — to use rebar in the foundations and footings, and mesh in the floor slab above. See our job-specific pages for typical combinations on house foundations and footings and extensions.

Who decides

Your structural engineer’s drawings (or building control, for smaller domestic work) will specify exactly what’s needed and where. If you’re pricing a job without drawings yet, our team can talk through the likely reinforcement based on what similar jobs typically use — but the final call is always the engineer’s.

This guide is intended as general background only. The reinforcement your project actually needs — bar size, mesh type, cover, spacing, lap lengths — is set by your structural engineer’s drawings or your building control surveyor, not by a website. Always work to the specification you’ve been given, and if you don’t have one, ask your engineer before you order.

Need reinforcement for your project? Get a fast, competitive quote or call 0207 856 0141 — we deliver rebar and mesh across London and the South East.