If you’ve seen “B500B” or “B500C” on a bar bending schedule or a mill certificate, both are describing the same basic grade of steel — the difference is in one specific property: ductility.

What “B500” means

The “500” is the steel’s characteristic yield strength — 500 MPa (megapascals) — which has been the standard grade for UK reinforcing bar for years, manufactured to BS 4449 and BS EN 10080. Virtually all modern UK rebar, whatever the ductility class, is grade 500.

What the B and C classes mean

The letter after 500 is the ductility class — essentially, how much the bar can stretch and deform before it fails, and how consistently it does that.

  • B500B — Class B, “normal” ductility. This is the standard, most widely stocked grade, suitable for the great majority of UK reinforced concrete design.
  • B500C — Class C, “high” ductility. A more ductile bar, with tighter control over the yield-to-tensile-strength ratio and elongation. It’s specified where the design relies on the reinforcement being able to deform significantly without fracturing — for example where the design assumes moment redistribution, or in structures designed for higher ductility demand.

Which one do you need?

Unless your engineer’s specification explicitly calls for B500C, B500B is almost always the correct and most cost-effective choice — it’s what’s specified on the vast majority of UK domestic and commercial jobs. If a drawing or specification does call out B500C, that requirement should be followed exactly, since it reflects a specific structural design assumption, not a general preference.

For sizes, weights and lengths by diameter, see our reinforcing bar range.

This guide is intended as general background only. The reinforcement your project actually needs — bar size, mesh type, cover, spacing, lap lengths — is set by your structural engineer’s drawings or your building control surveyor, not by a website. Always work to the specification you’ve been given, and if you don’t have one, ask your engineer before you order.

Need reinforcement for your project? Get a fast, competitive quote or call 0207 856 0141 — we deliver rebar and mesh across London and the South East.